دستگاه  جوش اینورتر ترانس پلاس سینرژیک 2700

نحوه کارکرد
کنترلر‌های میکروپروسسور و کاملاً دیجیتالی برای ایجاد قوس الکتریکی کوتاه و بدست آوردن بهترین عملکرد در تمام زمینه‌ها و بدست آوردن نتایج مورد نظر با خروجی 270 آمپر  در هر لحظه قابل استفاده هستند.
منبع تغذیه آن بهترین عملکرد جوشکاری را در هر شرایطی مهیا مینماید و در هر لحظه بهترین نتیجه حاصل میگردد.
سیستم تغذیه درونی دستگاه به شما این امکان را میدهد که از آن در کارگاهها، پروژه‌های ساختمانی و انجام تعمیرات و خدمات پس از فروش استفاده نمایید.
این دستگاه برای جوشکاری میگ مگ، تیگ و الکترود قابل استفاده است.
با این دستگاه، سیستم جوش قوسی قابل جابجایی خواهد بود.
کار با این دستگاه شما  بهترین عملکرد، بالاترین دقت و اجرای بهینه جوشکاری را در هر زمان و مکان  بهمراه خواهید داشت.

فلزات قابل استفاده در دستگاه:
آلومینیوم، کرونیکل ، فلزات خاص، فولاد
موارد مورد استفاده:
خودرو و صنایع جانبی
طرحهای صنعتی، ساخت خطوط و لوله های نفتی، صنایع وابسته
تعمیرات و خدمات پس از فروش :
تولید خودروهای خاص و ساخت ماشین آلات صنعتی
ساخت ماشین آلات و کانتینر، مهندسی صنایع فولادی
ساخت تجهیزات ریلی
ساخت صنایع دریائی و کشتی

  • Portable pulse welding with 270 A
  • For manual MIG/MAG applications
  • Output of up to 270 A

The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding.

With the TransPulsSynergic 2700, pulse welding becomes portable. Highest precision, exact reproducibility and best weld properties, anytime, anywhere.


3 – 270 A
40 % d.c. at 270 A,100 % d.c. at 170 A
27 kg / 59.52 lb

3 x 400 V


Process
MIG/MAG
Base metals
  • Aluminium
  • CrNi
  • Special metals
  • Steel

    Fields of use
    • Automobile and component supply industry
    • Industrial plants, pipeline construction, assembly companies
    • Maintenance and repair
    • Manufacture of special vehicles and construction machinery
    • Metal and gantry construction, fitting shops and forges
    • Plant, container and machine construction, steel engineering
    • Rail vehicle construction
    • Shipbuilding / offshore
Overview

Overview

  • 4-roller drive 
    For safe, precise and friction-free wire transport
  • Digital welding process control 
    For one-off precision in the welding process, exact reproducibility and outstanding weld properties
  • Earth fault monitor 
    Prevents the welding current from flowing over the earth wire, which would destroy the PE conductor system
  • Energy-saving inverter technology 
    For higher degrees of efficiency, lower weight and smaller dimensions
  • Job mode 
    Once perfected, machine settings can be saved and called up at any time.
  • Remote control facility 
    Enables user to intervene in the welding process directly on-site and change parameters
  • Synergic operation 
    For optimum welding parameters. Simply select material and sheet thickness and the stored know-how controls the welding process automatically
  • Touchdown ignition 
    For ignition with no high-voltage pulses in sensitive applications
Equipment features

Equipment features

General

  • “S” mark, CE mark as standard
  • 4-roller drive
  • Anti-stick function
  • Automatic burn-back correction
  • Automatic cooling unit shutdown
  • Basket spool adapter
  • Burn-back pulse (perfect wire end, optimum re-ignition)
  • Carrying handle
  • Cellulose-compatible
  • Continuous welding current adjustment using TIG welding torch
  • Digital welding process control
  • Earth fault monitor
  • Energy-saving inverter technology
  • Expansion using modules
  • Feeder inching – no gas or current
  • Gas test function
  • Job mode
  • Microprocessor controlled
  • Operating hours counter
  • Overtemperature protection
  • Remote control facility
  • Synergic operation
  • TIG Comfort stop
  • Temperature-controlled fan
  • Touchdown ignition
  • Wire feeder creep

Operating modes

  • 2-step mode, 4-step mode
  • Manual
  • Spot welding
  • TIG
  • Welding start aluminium (special 4-step mode)

Displays

  • “a” dimension
  • Arc length
  • Final (i.e. “end”) current
  • Hold function Automatically saves the actual values when welding finishes
  • Intermediate arc
  • Job number
  • Mains voltage monitor
  • Manual mode
  • Motor current
  • Operating mode
  • Service codes
  • Sheet thickness
  • Welding current
  • Welding current (actual value)
  • Welding current (standard value)
  • Welding speed
  • Welding voltage
  • Welding voltage (actual value)
  • Welding voltage (standard value)
  • Wire feed speed

Settabel Parameters

  • Arc length correction
  • Burn-back time
  • Droplet detachment correction
  • Dynamic
  • Final (i.e. “end”) current
  • Gas post-flow time
  • Gas pre-flow time
  • Hot start

Options

General

  • Carrying strap
  • Current flow signal
  • Keylock switch
  • Polarity switching
  • PullMig mode
  • Spatter-free ignition
  • SynchroPulse
  • Welding programs from database

Process

Process

  • MIG brazing
  • MIG/MAG Standard
  • MIG/MAG pulse
  • TIG DC

Base materials

Recommended ground materials

  • Aluminium
  • CrNi
  • Special metals
  • Steel

Application area/sector

Recommended areas of use

  • Automobile and component supply industry
  • Industrial plants, pipeline construction, assembly companies
  • Maintenance and repair
  • Manufacture of special vehicles and construction machinery
  • Metal and gantry construction, fitting shops and forges
  • Plant, container and machine construction, steel engineering
  • Rail vehicle construction
  • Shipbuilding / offshore
Technology

Technology

Digital Revolution
To see the benefits of the digital revolution in welding technology, let’s try listening first: to some music. Why? Simple: Not so very long ago, the good old vinyl record was the most important medium. The only problem was that it soon reached its limits in terms of quality. The more frequently it was played, the more the sound quality deteriorated. With digital technology, music remains music no matter how often a song is played. The quality remains the same. The same applies to Fronius digital welding technology: 100 % reproducible welding results. Again and again. As often as you want. The basis for this is the highest possible precision in the welding process. And it’s completely digitally controlled.

Technical Data

3 x 400 VMains voltage
+ 15 % / – 15 %Mains voltage tolerance
50 / 60 HzMains frequency
16 AMains fuse protection
6,6 APrimary continuous current (100 %)
4,5 – 8,7 kVAPrimary continuous power (kVA)
0,99Cos phi
87%Degree of efficiency
3 – 270 AWelding current range MIG/MAG
3 – 270 AWelding current range TIG
10 – 270 AWelding current range, electrode
40 % d.c. at 270 ADuty cycle at 10 min/40° C (104° F)
100 % d.c. at 170 ADuty cycle at 10 min/40° C (104° F)
50 VOpen-circuit voltage
14,2 – 27,5 VWorking voltage MIG/MAG
10,1 – 20,8 VWorking voltage TIG
20,4 – 30,8 VWorking voltage Electrode
IP 23Protection
AFType of cooling
BInsulation class
625/290/475Dimensions l/w/h mm
24.6/11.4/18.7Dimensions l/w/h (inches)
27Weight kg
59.5Weight lb
CEMarks of conformity
CSAMarks of conformity
SSafety