دستگاه جوش اینورتر ترنس سینرژیک 7200

خروجی جوش تا 720 آمپر

برای استفاده روباتیک و اتوماسیون

منبع قدرتمند آن به صورت‌های زیر قابل استفاده است:

دو کنترل‌کننده ترانس 4000s که به رابط داده‌های سرعت بالا متصل هستند که ترکیب آنها خروجی 720 آمپر را فراهم می‌کند.

اتصال موازی که برای بالا بردن بیشترین میزان رسوب طراحی شده است که در هر دو سیستم روباتیک و اتوماسیون قابل استفاده است.

فلزات قابل استفاده در دستگاه:

آلومینیوم، کرونیل، فلزات خاص، فولاد

موارد مورد استفاده:

خودرو و صنایع جانبی

طرح‌های صنعتی، ساهت خطوط و لوله‌های نفتی، صنایع وابسته

تعمیرات و خدمات پس از فروش

تولید خودروهای خاص و ساخت ماشین‌آلات صنعتی

ساخت ماشین‌آلات و کانتینر، مهندسی صنایع فولادی

ساخت تجهیزات ریلی

ساخت کشتی و تجهیزات دریایی

  • Pulse welding up to 720 A
  • For automated and robot applications

The powerful power sources are based on a tried and tested solution: two digitally controlled TransPuls Synergic 4000s are connected via a high-speed data interface, achieving a combined output of 720 A.

The parallel-connected Duo is designed for high deposition rates, as required in automated and robotic applications.

3 – 720 A
60 % d.c. at 720 A,100 % d.c. at 640 A
35,2 kg / 77.6 lb

2 x 3 x 400 V


Process
MIG/MAG
Base metals
  • Aluminium
  • CrNi
  • Special metals
  • Steel

    Fields of use
    • Automobile and component supply industry
    • Industrial plants, pipeline construction, assembly companies
    • Maintenance and repair
    • Manufacture of special vehicles and construction machinery
    • Plant, container and machine construction, steel engineering
    • Rail vehicle construction
    • Shipbuilding / offshore
Overview

Overview

  • Digital welding process control 
    For one-off precision in the welding process, exact reproducibility and outstanding weld properties
  • Earth fault monitor 
    Prevents the welding current from flowing over the earth wire, which would destroy the PE conductor system
  • Energy-saving inverter technology 
    For higher degrees of efficiency, lower weight and smaller dimensions
  • Remote control facility 
    Enables user to intervene in the welding process directly on-site and change parameters
  • Synergic operation 
    For optimum welding parameters. Simply select material and sheet thickness and the stored know-how controls the welding process automatically
Equipment features

Equipment features

General

  • “S” mark, CE mark as standard
  • Anti-stick function
  • Automatic burn-back correction
  • Automatic cooling unit shutdown
  • Basket spool adapter
  • Burn-back pulse (perfect wire end, optimum re-ignition)
  • Carrying handle
  • Cellulose-compatible
  • Continuous welding current adjustment using TIG welding torch
  • Digital welding process control
  • Earth fault monitor
  • Energy-saving inverter technology
  • Expansion using modules
  • Feeder inching – no gas or current
  • Gas test function
  • Job mode
  • Microprocessor controlled
  • Operating hours counter
  • Overtemperature protection
  • Remote control facility
  • Synergic operation
  • Temperature-controlled fan
  • Wire feeder creep

Operating modes

  • 2-step mode, 4-step mode
  • Manual
  • Spot welding
  • Welding start aluminium (special 4-step mode)

Displays

  • Arc length
  • Final (i.e. “end”) current
  • Hold function Automatically saves the actual values when welding finishes
  • Job number
  • Mains voltage monitor
  • Manual mode
  • Motor current
  • Operating mode
  • Overtemperature
  • Service codes
  • Sheet thickness
  • Welding current
  • Welding current (actual value)
  • Welding current (standard value)
  • Welding voltage
  • Welding voltage (actual value)
  • Welding voltage (standard value)
  • Wire feed speed

Settabel Parameters

  • Arc length correction
  • Burn-back time
  • Droplet detachment correction
  • Dynamic
  • Final (i.e. “end”) current
  • Gas post-flow time
  • Gas pre-flow time
  • Hot start

Options

General

  • Carrying strap
  • Current flow signal
  • Polarity switching
  • PullMig mode
  • Spatter-free ignition
  • SynchroPulse
  • Welding programs from database

Process

Process

  • MIG brazing
  • MIG/MAG high performance welding
  • MIG/MAG pulse
  • TIG DC

Base materials

Recommended ground materials

  • Aluminium
  • CrNi
  • Special metals
  • Steel

Application area/sector

Recommended areas of use

  • Automobile and component supply industry
  • Industrial plants, pipeline construction, assembly companies
  • Maintenance and repair
  • Manufacture of special vehicles and construction machinery
  • Plant, container and machine construction, steel engineering
  • Rail vehicle construction
  • Shipbuilding / offshore
Technology

Technology

Digital Revolution
To see the benefits of the digital revolution in welding technology, let’s try listening first: to some music. Why? Simple: Not so very long ago, the good old vinyl record was the most important medium. The only problem was that it soon reached its limits in terms of quality. The more frequently it was played, the more the sound quality deteriorated. With digital technology, music remains music no matter how often a song is played. The quality remains the same. The same applies to Fronius digital welding technology: 100 % reproducible welding results. Again and again. As often as you want. The basis for this is the highest possible precision in the welding process. And it’s completely digitally controlled.

Technical Data

2 x 3 x 400 VMains voltage
+ 10 % / – 10 %Mains voltage tolerance
2 x 35 AMains fuse protection
2 x 12,7 kVAPrimary continuous current (100 %)
0,99Cos phi
89%Degree of efficiency
3 – 720 AWelding current range MIG/MAG
3 – 720 AWelding current range TIG
10 – 720 AWelding current range, electrode
60 % d.c. at 720 ADuty cycle at 10 min/40° C (104° F)
100 % d.c. at 640 ADuty cycle at 10 min/40° C (104° F)
100 % d.c. at 720 ADuty cycle at 10 min/25° C (77° F)
70 VOpen-circuit voltage
14,2 – 34,0 VWorking voltage MIG/MAG
10,1 – 26,0 VWorking voltage TIG
20,4 – 36,0 VWorking voltage Electrode
IP 23Protection
625/290/475Dimensions l/w/h mm
35,2Weight kg