دستگاه جوش  اینورتر ترانس پلاس سینرژیک 9000

منبع قدرتمند آن به صورت‌های زیر قابل استفاده است:

دو کنترل‌کننده ترانس سینرژیک 5000s که به رابط داده‌های سرعت بالا متصل هستند که ترکیب آنها خروجی 900 آمپر را فراهم می‌کند.

اتصال موازی که برای بالا بردن بیشترین میزان رسوب طراحی شده است که در هر دو سیستم روباتیک و اتوماسیون قابل استفاده است.

فلزات قابل استفاده در دستگاه:

آلومینیوم، کرونیل، فلزات خاص، فولاد

موارد مورد استفاده:

خودرو و صنایع جانبی

طرح‌های صنعتی، ساخت خطوط و لوله‌های نفتی، صنایع وابسته

تعمیرات و خدمات پس از فروش

تولید خودرو‌های خاص و ساخت ماشین‌آلات صنعتی

ساخت ماشین‌آلات و کانتینر، مهندسی صنایع فولادی

ساخت تجهیزات ریلی

TransSynergic 9000

  • Output up to 900 A
  • For automated and robot applications 

The powerful power sources are based on a tried and tested solution: two digitally controlled TransSynergic 5000s are connected via a high-speed data interface, achieving a combined output of 900 A.

The parallel-connected Duo is designed for high deposition rates, as required in automated and robotic applications.


6 – 900 A
40 % d.c. at 900 A,100 % d.c. at 720 A
72 kg / 158.73 lb

2 x 3 x 400 V~


Process
MIG/MAG
Base metals
  • Aluminium
  • CrNi
  • Special metals
  • Steel

    Fields of use
    • Automobile and component supply industry
    • Industrial plants, pipeline construction, assembly companies
    • Manufacture of special vehicles and construction machinery
    • Plant, container and machine construction, steel engineering
    • Rail vehicle construction
    • Robotic welding
    • Shipbuilding / offshore
Overview

Overview

  • Earth fault monitor 
    Prevents the welding current from flowing over the earth wire, which would destroy the PE conductor system
  • Energy-saving inverter technology 
    For higher degrees of efficiency, lower weight and smaller dimensions
  • Job mode 
    Once perfected, machine settings can be saved and called up at any time.
  • Microprocessor controlled 
    for easy operation
  • Remote control facility 
    Enables user to intervene in the welding process directly on-site and change parameters
  • Synergic operation 
    For optimum welding parameters. Simply select material and sheet thickness and the stored know-how controls the welding process automatically
Equipment features

Equipment features

General

  • “S” mark, CE mark as standard
  • Anti-stick function
  • Automatic burn-back correction
  • Automatic cooling unit shutdown
  • Automatic gas post-flow time (welding current-dependent)
  • Burn-back pulse (perfect wire end, optimum re-ignition)
  • Cellulose-compatible
  • Continuous welding current adjustment using TIG welding torch
  • Digital welding process control
  • Earth fault monitor
  • Energy-saving inverter technology
  • Expansion using modules
  • Feeder inching – no gas or current
  • Gas test function
  • Hot start
  • Job mode
  • Microprocessor controlled
  • Overtemperature protection
  • Remote control facility
  • Synergic operation
  • TIG Comfort stop
  • Temperature-controlled fan
  • Wire feeder creep
  • free parameter selection on the welding torch

Operating modes

  • 2-step mode, 4-step mode
  • Spot welding
  • TIG
  • Welding start aluminium (special 4-step mode)

Displays

  • Final (i.e. “end”) current
  • Hold function Automatically saves the actual values when welding finishes
  • Intermediate arc
  • Mains voltage monitor
  • Operating mode
  • Overtemperature
  • Service codes
  • Sheet thickness
  • Welding current
  • Welding current (actual value)
  • Welding current (standard value)
  • Welding voltage
  • Welding voltage (actual value)
  • Welding voltage (standard value)
  • Wire feed speed

Settabel Parameters

  • Arc length correction
  • Burn-back time
  • Dynamic
  • Final (i.e. “end”) current
  • Gas post-flow time
  • Gas pre-flow time
  • Spot-welding time

Options

Displays

  • “a” dimension
  • Arc length
  • Job number
  • Manual mode
  • Motor current
  • Welding speed

General

  • Current flow signal
  • Flow watchdog for torch cooling
  • Hosepack holder – Human
  • Keylock switch
  • PullMig mode
  • Robot interface, analog
  • Robot interface, digital
  • Spatter-free ignition
  • Touchdown ignition
  • Welding programs from database

Process

Process

  • MIG brazing
  • MIG/MAG Standard
  • MIG/MAG high performance welding
  • TIG DC

Base materials

Recommended ground materials

  • Aluminium
  • CrNi
  • Special metals
  • Steel

Application area/sector

Recommended areas of use

  • Automobile and component supply industry
  • Industrial plants, pipeline construction, assembly companies
  • Manufacture of special vehicles and construction machinery
  • Plant, container and machine construction, steel engineering
  • Rail vehicle construction
  • Robotic welding
  • Shipbuilding / offshore
Technology

Technology

Digital Revolution
To see the benefits of the digital revolution in welding technology, let’s try listening first: to some music. Why? Simple: Not so very long ago, the good old vinyl record was the most important medium. The only problem was that it soon reached its limits in terms of quality. The more frequently it was played, the more the sound quality deteriorated. With digital technology, music remains music no matter how often a song is played. The quality remains the same. The same applies to Fronius digital welding technology: 100 % reproducible welding results. Again and again. As often as you want. The basis for this is the highest possible precision in the welding process. And it’s completely digitally controlled.

Technical Data

2 x 3 x 400 V~Mains voltage
+ 15 % / – 15 %Mains voltage tolerance
50 / 60 HzMains frequency
30,2 kVAPrimary continuous power (kVA)
0,99Cos phi
89%Degree of efficiency
6 – 900 AWelding current range MIG/MAG
40 % d.c. at 900 ADuty cycle at 10 min/40° C (104° F)
100 % d.c. at 720 ADuty cycle at 10 min/40° C (104° F)
70 – 80 VOpen-circuit voltage
14,2 – 44 VWorking voltage MIG/MAG
IP 23Protection
AFType of cooling
FInsulation class
2 x 625/290/480Dimensions l/w/h mm
72Weight kg
CEMarks of conformity
SSafety