دستگاه جوش چندمنظوره ترانس استیل ۲۲۰۰ (CO2,آرگون و الکترود)
TRANSSTEEL 2200
Multiprocess welding system – MIG/MAG, TIG and MMA
Whether the TransSteel 2200 is being used on a construction site, in a workshop, in agriculture, in metalworking trades,
or for assembly, repair and maintenance work, it easily masters MIG/MAG, TIG and MMA welding to the same high level.
THE ADVANTAGES OF THE TRANSSTEEL 2200
THREE PROCESSES, ONE POWER SOURCE
/ MIG/MAG, TIG and MMA welding
/ No compromises with the individual welding processes
/ Rapid switching between the processes
/ Easy process switchover thanks to an additional gas solenoid valve on the rear
STATIONARY AND PORTABLE
/ Suitable for workshops, construction sites and assembly work
/ Easy to move – 15 kg
/ Carry handle plus an optional carrying strap
/ Skid runners on the sides
/ Compensation of mains voltage fluctuations in long mains leads
SIMPLE TO OPERATE
/ The same intuitive operating concept common to all Fronius power sources
/ All important parameters can be viewed and adjusted on the front panel
/ Additional settings options in the sub-menu
/ Parameters can be changed through turn/press function
THE MOST COMPACT TRANSSTEEL
/ Internal wirefeeder for D100 and D200 wirespools
/ Newly developed two-roller motor plate for stable wirefeed
/ Wearing parts box inside the power source
TECHNICAL DATA
| TransSteel 2200 Std | TransSteel 2200 MV | |||
| Mains voltage -20 / +15% | 230 V | 230 V | 120 V | 120 V |
| Mains fuse protection (slow-blow) | 16 A | 16 A | 20 A | 15 A |
| Maximum primary current | 26 A | 26 A | 29 A | 20 A |
| Maximum primary power | 5.92 kVA | 5.92 kVA | 3.26 kVA | 2.35 kVA |
| Cos phi | 0.99 | 0.99 | ||
| Efficiency | 90% (at 150 A) | 90% (at 150 A) | 87% (at 100% D.C.) | |
| Wire speed | 1.5 – 18 m/min | 1.5 – 18 m/min | ||
| WELDING CURRENT RANGE | ||||
| MIG/MAG | 10 – 210 A | 10 – 210 A | 10 – 135 A | 10 – 105 A |
| MMA | 10 – 180 A | 10 – 180 A | 10 – 110 A | 10 – 90 A |
| TIG | 10 – 230 A | 10 – 230 A | 10 – 160 A | 10 – 135 A |
| WELDING CURRENT | ||||
| MIG/MAG | ||||
| 10min/40 °C (104 °F) 30% D.C. | 210 A | 210 A | 135 A | 105 A |
| 10min/40 °C (104 °F) 60% D.C. | 170 A | 170 A | 120 A | 95 A |
| 10min/40 °C (104 °F) 100% D.C. | 150 A | 150 A | 105 A | 80 A |
| MMA | ||||
| 10min/40 °C (104 °F) 35% D.C. | 180 A | 180 A | 110 A | 90 A |
| 10min/40 °C (104 °F) 60% D.C. | 150 A | 150 A | 100 A | 80 A |
| 10min/40 °C (104 °F) 100% D.C. | 130 A | 130 A | 90 A | 70 A |
| TIG | ||||
| 10min/40 °C (104 °F) 35% D.C. | 230 A | 230 A | 160 A | 135 A |
| 10min/40 °C (104 °F) 60% D.C. | 200 A | 200 A | 150 A | 120 A |
| 10min/40 °C (104 °F) 100% D.C. | 170 A | 170 A | 130 A | 105 A |
| Open circuit voltage | 90 V | 90 V |
| OUTPUT VOLTAGE RANGE | ||
| MIG/MAG | 14.5 – 24.5 V | 14.5 – 24.5 V |
| MMA | 20.4 – 27.2 V | 20.4 – 27.2 V |
| TIG | 10.4 – 19.2 V | 10.4 – 19.2 V |
| Degree of protection | IP 23 | IP 23 |
| Type of cooling | AF | AF |
| Dimensions l x w x h | 560 x 215 x 370 mm / 22.1 x 8.5 x 15 in. | 560 x 215 x 370 mm / 22.1 x 8.5 x 15 in. |
| Weight | 15 kg (33.1 lb) | 15.2 kg (33.5 lb) |
